User's Manual

DSW Digital Wireless System
LECTROSONICS, INC.
8
Receiver LCD Interface
All settings can be made from the front panel keypad
and LCD interface, including transmitter settings if it is
connected to the receiver with the key cable. The con-
trol interface consists of membrane switches, a rotary
encoder with push switch and a graphical LCD.
Press a channel
select button to open
a setup screen
Press the center of the
rotary encoder to open the
menu select screen
Selected receiver
Selected item is enclosed in markers
Turn the rotary encoder to select the option at the
bottom of the screen. Press the center of the rotary
encoder to open the setup screen or menu for the se-
lected item. In the example below, the setup screen for
channel 3 is open, with the frequency in MHz selected.
Selected item is highlighted with
ruled lines above and below
Press the center of the rotary encoder and then turn it
to adjust the value of the selected item.
When the desired value is set, press the center of the
rotary encoder to deselect the item. Rotate the encod-
er to select the next item.
Press one of the numbered switches under the display
to open a setup screen for the corresponding chan-
nel. Press the BACK button to return to the previous
screen. Press the center of the rotary encoder to open
the menu selector screen.
There are three levels in the menu structure:
s Top Menu includes links to the RX and TX menus
and setup screens for system parameters such as
frequency scanning, encryption key generation and
configuring hardware connections.
s RX Menu includes setup screens for the receiver
parameters and a link back to the Top Menu.
s TX Menu includes setups screens for the transmitter
and a link back to the Top Menu.
Rotate the encoder to scroll through the menu items.
Select the desired item and press the encoder to enter
the next menu or setup screen.
In the RX and TX menus, a link is included in the left-
most position to return to the Top Menu.
You can also press the BACK button on the control
panel to return to the previous screen or menu.
Lower bar describes the highlighted menu
Top bar lists active menu
Main Window displays a summary of all channels