User's Manual

DSW Digital Wireless System
LECTROSONICS, INC.
4
Receiver Front Panel
Headphone output
A standard 1/4 inch jack and volume control knob
LCD and control Interface
All settings for the receiver and transmitter can be
adjusted from the receiver front panel.
Encryption key and settings transfer port
A cable between the transmitter and this port on the
receiver is used to transfer the encryption key from the
receiver to the transmitter. This connection can also
be used to send the transmitter settings stored in the
receiver to the transmitter.
The interface cable, P/N DRKEYCABLE, is used to
make this connection.
USB Port
A standard USB port is used to connect to a computer
for system setup and monitoring.
Comm LED
The LED blinks blue to indicate USB, RS-232 and
ethernet communication.
Alert LED
This LED blinks to indicate fault or error, and glows
white during firmware updates.
Power LED
The LED glows blue to indicate power is turned on.
Headphone output
LCD and control inferface
for system setup
Encryption key and
settings transfer port
USB port
Comm
LED
Alert LED Power
LED
Rotary
encoder