User's Manual

UCR411A
LECTROSONICS, INC.
18
Lift and rotate the battery door to open it.
Observe the battery contacts inside the compartment.
The larger contact is the neg. (-) terminal and the
smaller contact is the pos. (+) terminal.
Insert the contact end of the battery first, making sure
the large terminals are aligned with the large contacts in
the compartment.
Depress the batteries slightly to allow the door to rotate
and close. The battery contacts are spring loaded to
maintain constant pressure. The door with snap into
place place when it is fully closed.
CAUTION: Lithium batteries will expand and
swell if allowed to go into a deep discharge.
Be sure to remove lithium batteries as soon
as possible after they are depleted. If lithium
batteries are allowed to fully discharge while
still inside the battery compartment, they will
be very difficult to remove.
Stuck lithium batteries can be avoided by
removing the label wrapping around the
battery before use. This will allow the battery
to swell but will still leave enough room in
the compartment for the battery to fall out
normally.
Replacing the Batteries
The larger contacts
are the neg. (–)
terminals.