User Manual

Page 2

Note: Be sure to set the charging current before inserting the handle into

the vehicle.

5. When using your charger, basic precautions should always be followed,

including the following:

• Read warnings on the charger cord label before operating the charger

for the ﬁrst time. Read all instructions in this guide before using this

charger.

• Never use the charger with an extension cord.

• Never use the charger with any AC adapter.

• Shock hazard – make sure the plug is fully inserted into the wall outlet

so that there are no exposed blade surfaces.

• Children should be supervised when in the vicinity of the charger

while plugged in.

• To reduce the risk of ﬁre, connect only to a circuit provided with

40 amps maximum branch circuit overcurrent protection.

Charging Display Overview

1. Real-time voltage

2. Charge amount

3. Charging time

4. Unit temperature

5. Real-time current

6. Charging icon

7. Rated current

8. Fault icon

9. Cause of fault

32A36.0℃

32.0A

225.39V

0.05KWH

00:02:29

32A36.0℃

0.0A

225.39V

0.05KWH

00:02:29

Leakage Error

FAULT