User manual

Operator's Manual
919586 RevA
115
 RxCmd1 Right-Hand Dialog - Provide values for the RT and Sub Address fields complete with Condition,
Value, To (for range conditions), and T/R controls. Word Count/Mode Code fields include Condition and
Mode Code controls. Select from 32 possible Mode Code values:
Mode Code Field Values
Dynamic Bus
Control
Synchronize
Transmit Status
Word
Initiate Self Test
Transmitter
Shutdown
Override
Transmitter
Shutdown
Inhibit
Terminal Flag
Override Inhibit
Terminal Flag
Reset Remote
Terminal
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Transmit
Vector Word
Synchronize
Transmit Last
Command
Transmit BIT
Word
Selected
Transmitter
Shutdown
Override Selected
Transmitter
Shutdown
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
 DW Right-Hand Dialog - Provide Data Pattern Setup field values for Data Condition,Start Bit and # Data
Bits, Data Value and Data Value To (for range conditions).
WORD SUB-TYPES, SETUP FORMAT, AND RIGHT-HAND DIALOGS
4. Setup Format
Note: When Transfer and Word Types are selected, the Setup Format section is shown in the area on label 4
of the screen-shot in the MIL-STD-1553 Trigger Setup Detail (on page 107) topic.
Select from either Binary or Hexadecimal (Hex) formats for your values entered on sub-type right-hand dialogs.
When the Word Type is selected on the Trigger Condition dialog, the All, Command, Data, and Status sub-types
are available.
5. Word Sub-Type Right-Hand Dialogs
When any sub-types other than All is selected, a correspondingly named right-hand dialog is shown.
Note: Right-hand dialogs are located in the area shown on label 5 of the screen-shot in the MIL-STD-1553
Trigger Setup Detail (on page 107) topic.
Command Sub-Type and Right-Hand Dialog
When the Command sub-type is selected, the Command right-hand dialog is made available. Provide values for
the RT and Sub Address fields complete with Condition, Value, To (for range conditions), and T/R controls.
Word Count/Mode Code fields include Condition and Word Count (amount) controls.
Data Sub-Type and Right-Hand Dialog
When the Data sub-type is selected, the Data right-hand dialog is made available. Provide Data Pattern Setup
field values for Data Condition,Start Bit and # Data Bits, Data Value and Data Value To (for range conditions).