User manual

Operator's Manual

919586 RevA

5. DATA PATTERN SETUP

 Data Value - Provide an appropriate value based on your Binary or Hexadecimal format selection.

 Data Value To - Specify a size in bits for your pattern.

 Condition - Possible entries for this field include Equal, Not Equal, Less than, Less than or Equal to,

Greather than, Greater than or Equal to, In Range, or Out Range.

 Pattern Length - The pattern length value defaults to the length, in bytes, of the pattern set in the Data

Value selection. If the length is changed to a lesser value, it truncates the beginning of the value. If the

length is increased, it would add don’t care XX byte values to the beginning of the value.

6. INTERFRAME SETUP

Click the appropriate button to select None or Manual. The Manual button enables the Byte Position and

Interframe Time fields where you can provide specific values.