User manual

Operator's Manual

CANbus-TD-TDM-OM-E RevB

triggered CAN message.

 sets the horizontal settings to real-time sample

mode using 4 channels.

 if connected to a channel, it also resets various

channel settings (interpolation, variable gain, scale

and offset, averaging, etc.) to a default value.

Qty. 1: USB2.0 Cable -- Provides power to the Trigger

Module. Also downloads CAN trigger conditions from the

oscilloscope’s CAN Trigger dialog to the Trigger Module.

Qty. 2: 120  Terminations -- A 9-pin to 9-pin DSUB

connector with an internal 120  termination between pins

2 and 7 (to convert a low-speed cable to a high-speed

cable).

Qty. 1: CAN Bus Connection Cable (High-speed)