User manual

Operator's Manual

CANbus-TD-TDM-OM-E RevB

Reference

CANbus TD and TDM Specifications

Note: Specifications are subject to change without notice.

Definition

CANbus TD and TDM

Protocol Setup

Select Bitrate (10, 25, 33.333, 50, 83.333, 100, 125, 250, 500, 1000 kb/s

or user-defined between 10-1000 kb/s).

Decode Capability

CANbus TD and TDM

Format

Hexadecimal

Decode Setup

Threshold definition required. Default is to Percent amplitude. Select

BitRate.

Decode Input

Any analog Channel, Memory or Math trace.

Number of Decoded

Waveforms

Up to 4 buses may be decoded at one time.

In addition, zooms can be displayed (with decoded information).

Location

Overlayed over DATA waveform, on Grid.

(Use multi-grid if there is more than one decoder ON)

Visual Aid

Color Coding for FRAME, ID, DLC, DATA, CRC, Ack, Stuff Bits and Errors.

Decode information is intelligently annotated based on timebase setting.

Trigger Capability

CANbus TD and TDM

Format

Hexadecimal or Binary

Trigger Setup

Trigger on All Frames, Frame ID, ID with Data, Remote Frames, or Error

Frames.

Address (ID)

Condition Setup

Specify one Frame ID or a range of Frame IDs. Frame ID trigger can be

combined with Data.

Conditional Trigger

Setup

Conditional Frame ID and Conditional Data triggering available. Choose

from <=, <, =, >, >=, <>, in range, out of range or don’t care conditions.

Data Setup

Hexadecimal: