User manual

BASICS

WaveSurfer 3000 Getting Started Guide

Math

Math traces display the result of applying a mathematical function (e.g., FFT) to one or more channel traces. One important distinction between math

functions and measurement parameters is that the result of math is always another waveform, whereas the result of measurement is a number.

Choose Math > Math Setup or press

front panel Math button to open Math

dialog.

Select an existing function (F1-F2)

to turn it on. Math trace opens in

separate grid.

Touch F<#> tab to set up or change a

function. (Deselect Trace On to close

trace.)

Choose Source channel and math

Operator (function).

Math descriptor box shows math

scaling. Touch to re-open F<#> tab

if closed.