User manual

USER INTERFACE
19
WaveSurfer 3000 Getting Started Guide
Entering/Selecting Data
Touch & Type
Touching once activates a control. In some cases, you’ll
immediately see a pop-up menu of options. Touch one
to select it.
On some pop-up menus, options can be
displayed as a list or as icons. Touch the
respective button to change the appearance.
In other cases, data entry fields appear highlighted on
the display. When a data entry field is highlighted (as
shown here), it is active and can be modified by using
the front panel Adjust knob.
If you have a keyboard installed, you can type your entry in the active field. Or,
you can touch again, then select your entry from the pop-up menu or keypad.
You’ll see a pop-up keypad when you double-touch a numerical data entry
field. Touch the soft keys to use it exactly as you would a calculator. When
you touch OK, the value is entered in the field.
Touch & Drag
Touch-and-drag waveforms, cursors and trigger indicators to reposition
them on the grid; this is the same as setting the values on the dialog. Quickly
zoom areas of the grid by touching and dragging to draw a selection box
around a portion of the trace.