User manual

SET UP

924853-00

Software Activation

The oscilloscope operating software (firmware and standard applications)

is active upon delivery.

To purchase an option, contact your Teledyne LeCroy sales representative at

the number listed in this guide. You will receive a license key via email that

activates the optional features on the oscilloscope. To install the key:

1. Go to Utilities > Utilities Setup > Options.

2. Touch Add Key.

3. Enter the new license key and click OK.

4. Reboot the oscilloscope.

Firmware Updates

Free firmware updates are available periodically from the Teledyne LeCroy

website at teledynelecroy.com/support/softwaredownload. Registered

users will receive email notification when a new update is released. To

download and install the update:

1. From a remote PC, visit our download page and click the link to

Oscilloscope Downloads > Firmware Upgrades.

2. Select your oscilloscope series and model number.

3. Enter your registration login information, or create a new account.

4. Click the download link, and choose to Save the installer to a USB

storage device.

5. Insert the USB device into one of the ports on the front of the

oscilloscope.

6. Go to Utilities > Utilities Setup.

7. On the Utilities dialog, choose Update Firmware.

8. Browse to the installer file in the USB Disk folder, then select Upgrade.

9. When installation is complete, power cycle the instrument.

CAUTION. The installation may take several minutes, depending on

the length of time since your last upgrade. Do not power down the

oscilloscope at any point during the installation process.