User manual

Operator's Manual
Save/Recall
The oscilloscope File menu allows you to save or retrieve waveform files, measurement table data, and
instrument setup panels.
Access these functions by choosing any of the Save or Recall options from the File menu. The dialog
contains a tab for each file function.
Save/Recall Setups
Save Setups allows you to quickly save up-to-six oscilloscope panel settings to internal storage, while Recall
Setups restores them with a touch.
If desired, you can also save oscilloscope panel settings as an .lss file in a different location, such as a USB
drive, and recall them from the same.
Saving Oscilloscope Setups
Choose File > Save Setup... from the menu bar.
SAVE SETUP TO MEMORY
1. Touch one of the Setup data entry controls and enter a name for the memory.
2. Touch the corresponding Save button directly to the left of the Setup field.
The save date/time is displayed above the Setup data entry control.
SAVE SETUP TO FILE
1. In Save Panel to File, touch Browse and navigate to the desired folder (Storage Card or USB Disk).
2. Enter a File name, or choose a existing file to overwrite. Touch OK.
3. On the Save Setups dialog, touch Save Now!
101