Manualshelf

User manual

ManualsBrandsLECROY ManualsLaboratory Test EquipmentDigital 350 MHz 4-channel 2 null 10 null 8 Bit Digital storage (DSO)
101102103104105106107108109110
WaveSurfer 3000 Oscilloscopes
1. Choose Utilities > WaveSource or touch the front panel WaveSource button.
2. Select the Load level.
3. Choose Waveform type ARB.
4. Touch Browse next to the File Name field and browse to the location of the arbitrary waveform file on
either the Storage Card or the USB Disk. Select the file and touch OK.
5. Touch Upload.
6. Check Enable to begin output.
NOTE: When outputting Arbitrary waveforms, the Frequency shown on the WaveSource dialog is the pattern
repetition rate, not the actual Frequency of the source waveform from which the waveform file was created.
Calibrate Function Generator
Touch the Calibrate button to start the internal calibration of the Function Generator.
CAUTION. Remove all cables before starting the calibration.
100