User manual

SET UP
9
WaveSurfer 3000 Getting Started Guide
The mixed signal intereface connects the digital leadset to input up-to-16
digital lines (with MSO option).
Ground and calibration output terminals are used to compensate passive
probes.
Channel inputs 1–4 (or 1–2 depending on model) are signal inputs to the
oscilloscope.
The Power button turns on/off the oscilloscope. See “Powering On/Off” for
more information.
The rotating, tilting feet enable four different viewing positions.
The touch screen display is the principal viewing and control center
of the oscilloscope. See “Touch Screen Display” for an overview of its
components.
The front panel houses buttons and knobs that control different
oscilloscope settings. Operate the instrument using front panel hard
controls, display soft controls, or a mix of both that is convenient for you.
All front panel knobs have multiple modes of
operation: pressing them invokes one action and
turning them another. The second label describes
what happens when you “push” instead of turn.
Front mounted host USB ports
can be used for transferring
data or connecting peripherals
such as a mouse or keyboard.