Manualshelf

User manual

ManualsBrandsLECROY ManualsLaboratory Test EquipmentDigital 200 MHz 4-channel 2 null 10 null 8 Bit Digital storage (DSO)
101102103104105106107108109110
WaveSurfer 3000 Oscilloscopes
Set Up DVM
1. From the menu bar, choose Utilities > DVM.
2. Mark Enable to turn on the DVM function.
3. Touch Source and select the input channel to be measured.
4. Touch Mode and choose the waveform parameter to display on the readout. Options are:
l DC
l DC RMS
l AC RMS
l Frequency
5. Optionally, turn on AutoRange, which automatically adjusts the Vertical range and offset of the waveform
as the amplitude changes so that measurements are always taken at the optimal resolution.When this
option is selected, the letter A appears on the DVM descriptor readout.
98