Datasheet

9
View decoded protocol information on top of physical layer waveforms and trigger on protocol
specic messages.
Powerful Serial Data Triggers
The serial data trigger will quickly
isolate events on a bus eliminating
the need to set manual triggers and
hoping to catch the right information.
Trigger conditions can be entered in
binary or hexadecimal formats and
conditional trigger capabilities even
allow triggering on a range of
different events.
Intuitive, Color-Coded
Decode Overlay
Protocol decoding is shown directly
on the waveform with an intuitive,
color-coded overlay and presented in
binary, hex or ASCII. Decoding on the
WaveSurfer 10 is fast even with long
memory and zooming in to the wave-
form shows precise byte by
byte decoding.
Table Summary and Search/Zoom
To further simplify the debug process
all decoded data can be displayed in a
table below the waveform grid.
Selecting an entry in the table with
the touch screen will display just
that event. Additionally, built-in
search functionality will nd specic
decoded values.
SERIAL TRIGGER AND DECODE OPTIONS
Supported Serial Data
Protocols
• I
2
C, SPI, UART
• CAN, CAN FD, LIN, FlexRay™, SENT
• Ethernet 10/100BaseT,
USB 1.0/1.1/2.0, USB 2.0-HSIC
• Audio (I
2
S, LJ, RJ, TDM)
• MIL-STD-1553, ARINC 429
• MIPI D-PHY, DigRF 3G, DigRF v4
• Manchester, NRZ
Debugging serial data busses can be confusing and time consuming. The serial data and
decode options for WaveSurfer 10 provide time saving tools for serial bus debug and validation.