Datasheet

ManualsBrandsLECROY ManualsLaboratory Test EquipmentDigital 1 GHz 22-channel 5 null 10 null 8 Bit Digital storage (DSO)

WaveSurfer 10

Oscilloscopes

1 GHz, 10 GS/s

The WaveSurfer 10 combines the MAUI advanced user interface

with powerful waveform processing, in addition to advanced

math, measurement and debug tools, to quickly analyze and nd

the root cause of problems. With a 10.4” touch screen display,

high performance hardware, and compact form factor the

WaveSurfer 10 is unique among 1 GHz oscilloscopes.

MAUI - A New Wave of Thinking

MAUI is the most advanced

oscilloscope user interface. MAUI

is designed for touch; all important

oscilloscope controls are accessed

through the intuitive touch screen.

MAUI is built for simplicity; time

saving shortcuts and intuitive dialogs

simplify setup. MAUI is made to solve;

deep set of debug and analysis

tools help identify problems and nd

solutions quickly.

Uncompromised Performance

Many 1 GHz oscilloscopes are avail-

able at attractive entry-point prices,

however, they are often limited in

sample rate, memory or features. The

WaveSurfer 10 provides uncompro-

mised 1 GHz performance with up

to 10 GS/s per channel and 32 Mpts

of memory.

Advanced Debug Toolkit

With the addition of the Advanced

Debug Toolkit, the WaveSurfer 10

becomes an unparalleled debug and

analysis machine adding 10 GS/s

sample rate on 4 channels, 32 Mpts

of memory, sequence mode, history

mode, 13 additional math functions,

and 2 simultaneous math traces.

Capture Debug, Analyze,

Document

Easily accessible measurement, math

and debug tools, plus a wide variety of

serial data protocol decoders, and ac-

tive probes ensure the WaveSurfer 10

can capture and analyze any type of

waveform and simplify the debug pro-

cess. The LabNotebook tool provides

a fast way to save waveforms, save

setups and screen images, report

results, and view offline.

Key Features

•

1 GHz, 10 GS/s, 10 Mpts/ch

•

MAUI - Advanced User Interface

–

Designed for Touch

–

Built for Simplicity

–

Made to Solve

•

WaveScan - Advanced Search

and Find

•

LabNotebook Documentation and

Report Generation

•

10.4” Touch Screen Display

•

Spectrum Analyzer Mode

•

Power Analysis Software

•

Serial Trigger and Decode

–

C, SPI, UART

–

CAN, LIN, FlexRay, SENT

–

Ethernet 10/100BaseT,

USB 1.0/1.1/2.0, USB2.0-HSIC

–

Audio (I

S, LJ, RJ, TDM)

–

MIL-STD-1553, ARINC 429

–

MIPI D-PHY, DigRF 3G, DigRF v4

–

Manchester, NRZ

•

Advanced Debug Toolkit adds:

–

10 GS/s on all 4 channels

–

16 Mpts/ch memory (32 Intlv’d)

–

Sequence Mode Segmented

Memory

–

History Mode Waveform

Playback

–

13 Additional Math Operators

–

2 Math Functions

Summary of content (12 pages)

PAGE 1
WaveSurfer 10 Oscilloscopes 1 GHz, 10 GS/s Key Features • • • 1 GHz, 10 GS/s, 10 Mpts/ch MAUI - Advanced User Interface – Designed for Touch – Built for Simplicity – Made to Solve aveScan - Advanced Search W and Find • LabNotebook Documentation and Report Generation • 10.4” Touch Screen Display • Spectrum Analyzer Mode • Power Analysis Software • Serial Trigger and Decode – I C, SPI, UART – CAN, LIN, FlexRay, SENT – Ethernet 10/100BaseT, USB 1.0/1.1/2.0, USB2.
PAGE 2
MAUI – A NEW WAVE OF THINKING MAUI is the most advanced oscilloscope user interface developed to put all the power and capabilities of the modern oscilloscope right at your fingertips. Designed for touch; all important oscilloscope controls are accessed through the intuitive touch screen. Built for simplicity; time saving shortcuts and intuitive dialogs simplify setup. Made to solve; a deep set of debug and analysis tools helps identify problems and find solutions quickly.
PAGE 3
Built for Simplicity A MAUI is built for simplicity. Basic waveform viewing and measure- B ment tools as well as advanced math and analysis capabilities are seamlessly integrated in a single user interface. Time saving short- C cuts and intuitive dialogs simplify setup and shorten debug time. D A Access shortcuts to analysis tools by touching the waveform. C Channel, timebase and trigger descriptors provide easy access to controls without navigating menus.
PAGE 4
ADVANCED TOOLS FOR WAVEFORM ANALYSIS Embedded Controller Design and Debug Save time when working with embedded controllers by adding high-performance mixed signal capability with the WaveSurfer 10. Capture digital signals up to 250 MHz with up to 10 Mpts/Ch memory, 1 GS/s and 18 channels. Quickly and easily isolate specific serial data events with I2C, SPI, UART, RS-232, USB 1.0/1.1/2.
PAGE 5
LabNotebook Documentation Tool LabNotebook is a one-button tool to save and restore waveforms, measurements and settings without navigating multiple menus. Custom reports can be created and easily shared; saved waveforms can be measured and analyzed later both on the oscilloscope or offline using the WaveStudio PC Utility.
PAGE 6
ADVANCED DEBUG TOOLKIT With the addition of the Advanced Debug Toolkit software, the A WaveSurfer 10 becomes an unparalleled debug and analysis machine.
PAGE 7
Advanced Waveform Capture with Sequence Mode Use Sequence mode to store up to 5,000 triggered events as “segments” into memory. This can be ideal when capturing many fast pulses in quick succession or when capturing events separated by long time periods. Sequence mode provides timestamps for each acquisition and minimizes dead-time between triggers to less than 1 μs. Combine Sequence mode with advanced triggers to isolate rare events over time and analyze afterwards.
PAGE 8
EMBEDDED CONTROLLER DESIGN AND DEBUG Teledyne LeCroy’s versatile WaveSurfer 10 mixed signal oscilloscope combines the powerful WaveSurfer 10 with the flexibility of digital inputs using the MS-250. In addition, the many triggering and decoding options turn the WaveSurfer 10 into an all-in-one analog, digital, and serial data trigger, acquisition, and debug machine.
PAGE 9
SERIAL TRIGGER AND DECODE OPTIONS Supported Serial Data Protocols • I2C, SPI, UART • CAN, CAN FD, LIN, FlexRay™, SENT • Ethernet 10/100BaseT, USB 1.0/1.1/2.0, USB 2.0-HSIC • Audio (I2S, LJ, RJ, TDM) • MIL-STD-1553, ARINC 429 • MIPI D-PHY, DigRF 3G, DigRF v4 • Manchester, NRZ View decoded protocol information on top of physical layer waveforms and trigger on protocol specific messages. Debugging serial data busses can be confusing and time consuming.
PAGE 10
SPECTRUM AND POWER ANALYZER Simple Frequency Domain Analysis Get better insight to the frequency content of any signal with use of the Spectrum Analyzer mode on the WaveSurfer 10. This mode provides a spectrum analyzer style user interface with controls for start/stop frequency or center frequency and span. The unique peak search automatically labels spectral components and presents frequency and level in an interactive table.
PAGE 11
WAVESURFER 10 SPECIFICATIONS Analog - Vertical Bandwidth (@ 50Ω) Rise time Input Channels Resolution Sensitivity DC Gain Accuracy BW Limit Maximum Input Voltage Input Coupling Input Impedance Analog - Acquisition Sample Rate (Single-shot) Sample Rate (Repetitive) Record Length Capture Time Acquisition Modes Timebase Range Timebase Accuracy Display System 1 GHz 350 ps 4 8 bits 2 mV/div–10 V/div (1 MΩ); 2 mV/div–1 V/div (50 Ω) ±1.0% of full scale (typical); ±1.
PAGE 12
ORDERING INFORMATION Product Description Product Code WaveSurfer 10 Oscilloscopes Product Description Product Code Serial Data Options 1 GHz, 5 GS/s, 4 Ch, 10 Mpts/Ch DSO with 10.4” Touch Screen Display.