User manual

WaveStation
64
WSta-OM-E RevA
quickly select a 1/-1V or 2/-2V DC Offset using corresponding
option buttons.
Note: After pressing either 1/-1V or 2/-2V DC Offset option
buttons, the Adjustment Control Knob may also be used to dial
in the desired level within a -3 to 3V range.
 IO Setup - After pressing the IO Setup option button, an additional
menu is shown where you can set USB or GPIB input/output
options.
o Press the USB Setup option button and an additional menu
is shown where you can choose either USBRAW or USBTMC
options by pressing corresponding option buttons for the
USB connector on the Back Panel (on page 14) of your
WaveStation.
PLEASE NOTE THE FOLLOWING:
 Be sure to make the USBRAW setting before
connecting to WaveStation from a PC using the
WaveStation PC Software. For more detailed
installation instructions, see Installing the
WaveStation PC Drivers and Software (on page 79).
 Be sure to make the USBTMC setting before
connecting to WaveStation from a PC using VISA.
Download the latest copy of NI-VISA at
www.ni.com/visa/.
o Press the GPIB option button and use the Adjustment
Control Knob from the Digital Input Front Panel Controls
(on page 27) to provide a specific GPIB Address value. This
GPIB enables the USB connector on the Front Panel (on
page 13) of your instrument.
PLEASE NOTE THE FOLLOWING:
 Be sure to make the correct GPIB Address setting
before connecting to WaveStation from a PC using
The USB-GPIB Adapter (on page 76).