User manual

Operator's Manual

WSta-OM-E RevA

 Provide your desired Offset or LLevel using the Digital Input Front

Panel Controls (on page 27).

Phase/EqPhase

With the Sine waveform and the Phase/EqPhase operation button

pressed once to select Frequency, a Sine waveform is shown on the

Waveform Display and the Phase is shown on the Waveform Detail

dialog.

PLEASE NOTE THE FOLLOWING:

 Press the Phase/EqPhase operation button a second time to

select and adjust the EqPhase parameter in the same manner.

Second operation button press parameters are shown in reverse

color on the waveform detail dialog to provide a visual indication

as to which parameter is being adjusted.

 While editing certain parameters using the Number Buttons,

applicable unit(s) are shown on the Operation menu. Press an

adjacent Operation button to select a desired Unit for your entry.

 Provide your desired Phase or EqPhase using the Digital Input

Front Panel Controls (on page 27).

Creating a Square Wave

When first pressing this waveform button on the Front Panel, the

WaveStation shows the Square Operation menu and corresponding

Display and Detail dialogs.