User manual

WaveStation
30
WSta-OM-E RevA
 Press the Amplitude/HLevel operation button a second time to
select and adjust the HLevel (High Level) parameter in the same
manner. Second operation button press parameters are shown in
reverse color on the waveform detail dialog to provide a visual
indication as to which parameter is being adjusted.
 While editing certain parameters using the Number Buttons,
applicable unit(s) are shown on the Operation menu. Press an
adjacent Operation button to select a desired Unit for your entry.
 Provide your desired Amplitude or HLevel using the Digital Input
Front Panel Controls (on page 27).
Offset/LLevel
With the Sine waveform and the Offset/LLevel operation button pressed
once to select Offset, a Sine waveform is shown on the Waveform
Display and the Offset is shown on the Waveform Detail dialog.
PLEASE NOTE THE FOLLOWING:
 Press the Offset/LLevel operation button a second time to select
and adjust the LLevel (Low Level) parameter in the same manner.
Second operation button press parameters are shown in reverse
color on the waveform detail dialog to provide a visual indication
as to which parameter is being adjusted.
 While editing certain parameters using the Number Buttons,
applicable unit(s) are shown on the Operation menu. Press an
adjacent Operation button to select a desired Unit for your entry.