User manual

Operator's Manual

WSta-OM-E RevA

2. USB Connector - USB 2.0 connector which is used for making

USBRAW or USBTMC connections as explained in WaveStation PC

Software Overview (on page 78) and Controlling WaveStation

with USB-GPIB and/or USBTMC (on page 76), respectively.

3. Ground Connector

4. AC Power Connector

Getting Started with WaveStation

The WaveStation Interface

Numbered callouts on this image of the WaveStation interface

correspond with the following descriptions.

Note: The default signal is a Sine wave as each channel tab and in the

upper-right corner of the display show.

1. Channel Tabs - The channel tabs display the currently chosen

Waveform or Function type and, when selected, show their

corresponding Display and Detail dialog.

2. Display Dialog - Shows a rendered waveform or modulated

waveform display of your generated signal and some additional

waveform details .

3. Detail Dialog - Shows even more data regarding specific

parameters for your selected Waveform or Function.

4. Waveform/Function Type Indicator - When using the Waveform

buttons, shows the waveform type for the corresponding

waveform channel selected.