User manual

Operator's Manual

WSta-OM-E RevA

You can also move the handle into a tucked position under the generator

for different viewing positions.

Front Panel

Numbered callouts on this image correspond with the following

descriptions.

1. Power Button

2. USB Connector - USB 2.0 connector which is used for making USB-

GPIB or Memory Stick connections as explained in Controlling

WaveStation with USB-GPIB and/or USBTMC (on page 76) and

Main Save/Recall Operations (on page 57), respectively.

3. LCD Display

4. Display Menu Operation Buttons

5. Waveform Buttons - These buttons control the selection of

Waveform Types and Default Parameters (on page 21).

6. Number Buttons

7. Function Buttons - When pressed, these buttons setup

corresponding Initial Function Settings (on page 22).