User manual

Operator's Manual

WSta-OM-E RevA

Note: It's important to realize that a scalar representation of the

waveform data is sent. Adjust the amplitude, frequency, and offset as

desired.

Minimum and Suggested WaveStation Software System

Requirements

MINIMUM SYSTEM REQUIREMENTS

 Operating system Microsoft™ Windows® XP, Windows® Vista 32

Bit Version, Windows® 7 32 Bit Version.

 Pentium® IV processor.

 1 Gb RAM.

 150 Mb hard disk available space for software set‐up.

 Video resolution 800 X 600.

 USB 2.0 connections.

Installing the WaveStation PC Drivers and

Software

In order to use WaveStation with your PC, you must install the drivers

and software in the following order:

1. First, turn on your WaveStation and configure the rear

USB connector for USBRAW as explained in Main Utility

Operations (on page 62). The setting can quickly be made at

Utility → IO Setup → USB Setup → USBRAW.

2. With your PC turned on, connect the 1 m USB 2.0 Type A to Type B

Cable from the rear of WaveStation to a USB connector on your

PC.

3. Your PC eventually should indicate that it's installing/looking for

the driver. If shown, you can close pop-ups or screens shown from

the connection of the USB cable.



On your PC, right-click Computer or My Computer and

select Manage. The Computer Management screen is

shown.



Select Device Manager under System Tools on the left

side of the Computer Management screen.