User manual

WaveStation

WSta-OM-E RevA

 External Hard Drives are not supported for use as USB flash

memory. The front USB is meant for use by what is commonly

known as memory sticks or thumb drive devices.

Utility

Utility Overview

The first step when using Utility is to press the corresponding Utility

function button on the Front Panel (on page 13).

Note: When using WaveStation (or any signal generator) it's important

to understand the relationship between the Main Waveform Type

buttons, the Waveform Signal Conditioning function buttons, and the

Save/Recall, Utility, and Help function buttons. See Combined Use of

Waveform, Function, and Configuration Buttons (on page 23).

Main Utility Operations

After pressing the Utility button on the Front Panel (on page 13), select

the desired function using the corresponding Display Menu Operation

buttons.

While details around the Utility operations are covered here, the

following section covers some menu control considerations.

For more information on getting to this point, see Navigating Interfaces,

Adjusting Parameters, and Making Selections (on page 16).

Common Util Menu Controls and Considerations

 After pressing the Util button on the Front Panel (on page 13), the

Display Menu Operation buttons are used to select applicable

values and make selections as desired.

A good portion of the operation buttons control two separate

parameters. Operation buttons controlling two parameters have

additional, lighter shaded function labels on them; press the

button once to adjust the top control parameter; twice to adjust

the bottom one. Make adjustments using the Digital Input Front

Panel Controls (on page 27).