User manual

WaveStation
14
WSta-OM-E RevA
Specifically, the top three buttons are Waveform Signal
Conditioning buttons and apply Mod, Sweep, or Burst functions to
the waveform you've selected. Meanwhile, the lower three,
Save/Recall, Utility, and Help, are for various WaveStation tools
and configurations along with some Help information.
8. BNC Channel Outputs and Corresponding Control Buttons - The
buttons above the BNC connectors control the
activation/deactivation of corresponding channel outputs.
9. Direction Buttons
10. Adjustment Control Knob
Note: When using WaveStation (or any signal generator) it's important
to understand the relationship between the Main Waveform Type
buttons, the Waveform Signal Conditioning function buttons, and the
Save/Recall, Utility, and Help function buttons. See Combined Use of
Waveform, Function, and Configuration Buttons (on page 23).
Back Panel
Numbered callouts on this image correspond with the following
descriptions.
1. Input and Output BNC Connectors - Four BNC Connectors provide
10 MHz In, Modulation In, Synch Out, Ext Trig/Gate/Fsk/Burst
Out.