Datasheet

WAVEACE 1000 SPECIFICATIONS
6
WaveAce 1001 WaveAce 1002 WaveAce 1012
Vertical
Bandwidth 40 MHz 60 MHz 100 MHz
Rise Time 8.8 ns 5.8 ns 3.5 ns
Input Channels
2
Vertical Resolution 8-bits
Vertical Sensitivity 2 mV/div – 10 V/div
Bandwidth Limiting Filter 20 MHz
Maximum Input Voltage 400 Vpk, CAT I
Input Coupling GND, DC 1 MΩ, AC 1 MΩ
Input Impedance 1 MΩ || 18 pF
Acquisition
Sampling Rate (Single Shot) 1 GS/s (interleaved),
500 MS/s (all channels)
Sampling Rate (Equivalent Time) 25 GS/s 50 GS/s
Peak Detect Period 10 ns
Memory Length 1 Mpts/Ch
Maximum Memory 2 Mpts
Timebase Range 2.5 ns/div – 50 s/div
Probes
Standard Probes 10:1, 1:1 Switchable Passive Probe (one per channel)
Triggering
Triggers Edge, Pulse Width, Video, Slope (Rise Time), Alternate
Measure, Math and Wave Recorder
Measure Amplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency,
Max, Mean, Min, Overshoot, Peak-Peak, Period, Phase, Preshoot, Rise Time, RMS, Top, + Width, - Width.
Plus 9 advanced parameters for edge to edge timing measurements
Math Add, Subtract, Multiply, Divide, FFT (up to 1 kpts with Rectangular, Von Hann, Hamming or
Blackman windows)
Waveform Sequence Recorder Record and playback a sequence of up to 2,500 waveforms
Input/Output Interfaces
USB USB host port for flash drives, USB device port for connecting to PC and printers
Physical
Dimensions (HWD) 163 mm x 313 mm x 115.8 mm; 6.42" x 12.32" x 4.6"
Weight 2.78 kg; 6.10 lbs.
Power Requirements
100 - 240 V (± 10%) at 50 / 60 / 400 Hz (± 5%).
Automatic AC voltage selection. Max power consumption: 50 W
Compliance
CE Compliant, UL and cUL listed.
Conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04.