User manual

WaveAce 1000/2000
WA1K2K-OM-E RevB 65
 Press the Waveform option button or turn the Adjust knob
to assign a number (No. 1 - No. 20) to the waveform.
 Press the Save option button to save the waveform.
 The waveform is saved to memory and the oscilloscope
briefly shows a Store Data Success! message on the lower
part of the grid display area.
Saving Waveforms to a USB Memory Device
 Insert the USB memory device, press the Save To option
button, and select File.
 Press the Save option button to save the waveform.
 Now, the SAVE ALL screen opens showing Directorys by
default. Finish saving to your USB memory device using the
following instructions in Using the SAVE ALL Screen (on
page 74).
1. Switch to the SAVE ALL - Files Menu - covered in the
Using the SAVE ALL Screen (on page 74) topic.
2. Name and Confirm your file using the steps explained
in Creating Folders and Files - also covered in the
Using the SAVE ALL Screen (on page 74) topic.
Recalling Waveforms
1. If you're not already on the SAVE/REC menu, press the
Save/Recall front panel button and the SAVE/REC menu is shown.
2. Press the Type option button and select Waveforms.