User manual

WaveAce Remote Control
18
920836 Rev A
ACQUISITION - BANDWIDTH_LIMIT, BWL
Description
The BWL command enables or disables the bandwidth limit (low-pass filter) of the specified
input channel.
The BWL? query returns the enabled/disabled status. If all the channels are in the same state, it
returns the state; if not, it returns each individual channel state.
Command Syntax
BandWidth_Limit <channel>,<mode>[,<channel>,<mode>...]
<channel>:= {C1, C2, C3, C4}
<mode>: = {ON, OFF}
Query Syntax
BWL?
Response Format
BWL <mode>
Example
This instruction sets a low-pass filter on Channel 2:
BWL C2,ON