User manual

WaveAce Remote Control

920836 Rev A

; Explanation of the DUAL array.

; This data array is identical to DATA_ARRAY_1, followed by

DATA_ARRAY_2.

; DUAL is an accepted alias name for the combined arrays DATA_ARRAY_1

and

; DATA_ARRAY_2 (e.g. real and imaginary parts of an FFT).

;

< 0> MEASUREMENT_1: data ; data in DATA_ARRAY_1.

;

< 0> MEASUREMENT_2: data ; data in DATA_ARRAY_2.

;

/00 ENDARRAY

;

00 ENDTEMPLATE

Oscilloscope's TMPL? Query Response

This template is the oscilloscope's response to a TMPL? query:/00

000000 LECROY_2_3: TEMPLATE

8 66 111

;

; Explanation of the formats of waveforms and their descriptors on the

; Teledyne LeCroy Digital Oscilloscopes,

; Software Release 8.1.0, 98/09/29.

;

; A descriptor and/or a waveform consists of one or several logical

data

; blocks whose formats are explained below.

; Usually, complete waveforms are read: at the minimum they consist of

; the basic descriptor block WAVEDESC a data array block.

; Some more complex waveforms, e.g. Extrema data or the results of a

; Fourier transform, may contain several data array blocks.

; When there are more blocks, they are in the following sequence:

; the basic descriptor block WAVEDESC