User manual
WAVESURFER MXS-B OSCILLOSCOPE
WSMXs-B-GSM-E Rev A 90
Panel Control
Zoom Control Action
Delay
Zooms horizontal position
Timebase
Zooms horizontal scale
Offset
Zooms vertical position
Gain / Sensitivity
Zooms vertical scale
Push – Zero Delay
Resets horizontal zoom to 10:1 scale, and resets to
default horizontal position
Push – Zero Offset
Resets vertical zoom to 1:1 scale, and resets to default
vertical position
Using Math Dialog Zoom Controls
1. Touch the descriptor label twice to open
the Math dialog.
2. Then use the Zoom dialog on the right to
change the horizontal and vertical
position and scale.
Toolbar Shortcuts
These toolbar shortcuts can be used to perform specific actions for the Math
Trace.
Opens a Measurement selection pop-up menu. You can then select
a parameter (measurement) for the Math trace from this menu
without leaving the Math Setup dialog. The parameter
automatically appears below the grid.
Loads the Math trace into its corresponding Memory (Reference
Waveform) location (Memory 1, or abbreviated as M1).
Opens a Labeling pop-up menu that allows you to create labels tied
to the waveform.