User manual

GETTING STARTED MANUAL
23 WSMXs-B-GSM-E Rev A
AutoSetup Button
Automatically sets timebase, trigger, and sensitivity to display a wide
range of repetitive signals.
Measure, Zoom, and Math Quick Buttons
Measure Press once to open the measure dialog. Press again to
close the dialog.
QuickZoom Press once to create zooms of all displayed
channels. Press again to unzoom.
Math Press once to turn on the Math trace, and display the Math
Setup dialog. Press again to close the dialog.
Cursor Knobs and Buttons
The WaveSurfer MXs-B oscilloscope has dedicated dual cursor
knobs for cursor control. Cursors always default to a relative
state (two cursors ON).
Knobs Rotate to adjust cursor position. If Cursors are OFF,
rotating either knob turns Cursors ON. At this point, push in
the button to set it as the default position.
Type Button Pressing the Type button once turns Cursors
ON to Horizontal (Time) measurements. Pressing the button
again changes it to Vertical (Amplitude) measurements.
Pressing it a third time turns the Cursors OFF.