User manual

Figure 4.33 - Bluetoothlow energy Timeline
4.3.2.9 How Packets Are Displayed
Bluetooth low energy packets are displayed in the low energy timeline in Segments and Rows.
l Segments are "pieces" of the timeline. You can zoom in to show just one segment, or you can zoom out to
show multiple segments. In multiple segment displays the segments are contiguous from top to bottom.
Refer to the diagram below. The top-most segment contains the beginning timestamp on the left. The
timeline proceeds from left to right in a segment, and continues in the next segment down beginning on
the left of that segment. If you zoom out to show two segments the viewable timeline appears in those
two segments. You will use the scroll bar on the right to scroll through the timeline.
In a one-segment display the viewable timeline appears in that one segment. You will scroll through the
timeline using the scroll bar appearing at the bottom of the timeline display.
l Rows show either the access address of the configured devices or of all discovered devices. Because the
segments are contiguous in multiple segment displays, the rows in each segment are identical.
In the following diagram we see a three segment display showing the timeline flow.
Chapter 4 Capturing and Analyzing Data TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 87