User manual

1. Select the tab of the desired protocol, or open the Summary combo box.
2. Select the desired protocol.
3. To filter on a different layer, just select another tab, or change the layer selection in the combo box.
Filtering on all Frames with Errors
To filter on all frames with errors:
1.
Open the Frame Display window.
2.
Click the starred Quick Filter icon or select Quick Filtering from the Filter menu
3. Check the box for All Frames With Errors in the Protocols To Filter In pane, and click OK.
4. The system creates a tab on the Frame Display labeled "Errors" that displays the results of
the All Frames With Errors filter.
Note: When you have multiple Frame Display windows open and you are capturing data, you
may receive an error message declaring that "Filtering cannot be done while receiving data
this fast." If this occurs, you may have to stop filtering until the data is captured.
4.3.2 low energy Timeline
The Bluetooth low energy Timeline displays packet information with an emphasis on temporal information
and payload throughput. The timeline also provides selected information from Frame Display.
The timeline provides a rich set of diverse information about low energy packets, both individually and as a range.
Information is conveyed using text, color, packet size, and position.
TELEDYNE LECROY Chapter 4 Capturing and Analyzing Data
78 Frontline BPA low energy Hardware & Software User Manual