User manual

Click the Display Filters icon on the Frame Display window or select Apply/Modify Display

Filters… from the Filter menu to open the Set Condition dialog box. Click on the Advanced button to

show the condition in Boolean format. The dialog box displays the current filter definition. To display

another filter, click the Open icon, and select the filter from the pop-up list of all the saved filters.

Figure 4.20 - Set Condition Dialog in Advanced View

2. Select the desired condition from the filter definition.

Click the Delete Selected Line icon.

4. Edit the Boolean operators and parentheses as needed.

5. Click OK. The system displays the Save Named Condition dialog. Ensure that the filter name is

displayed in the text box at the top of the dialog, and click OK. (If you choose to create an additional filter,

then provide a new name for the filter condition or accept the default name provided by the system and

click OK.) The Set Condition dialog box closes, and the system applies the modified filter.

Note: When a display filter is applied, a description of the filter appears to the right of the

toolbar in the Frame Display windows.

Renaming a Display Filter

Select Rename Display Filters… from the Filter menu in the Frame Display window to open

the Rename Filter dialog. The system displays the Rename Filter dialog with a list of all user defined

filters in the Filters combo box.

TELEDYNE LECROY Chapter 4 Capturing and Analyzing Data

70 Frontline BPA low energy Hardware & Software User Manual