User manual

l Named filters are user-defined. User-defined filters persist in a template file. User defined filters can be
deleted.
Quick Filters
l Quick Filters are combinations of Protocol Filters and/or Named Filters that are displayed on the Quick Filter
tab.
l Quick Filters cannot be saved and do not persist across sessions.
l Quick Filters are created on the Quick Filter Dialog.
4.3.1.13.1.1 Creating a Display Filter
There are two steps to using a display filter. Define the filter conditions, and then apply the filter to the data set.
The system combines both filter definition and application in one dialog.
1.
Click the Display Filters icon on the Frame Display window or select Apply/Modify
Display Filters from the Filter menu to open the Set Condition dialog box. The Set Condition dialog is
self configuring which means that when you Select each frame under Conditions the following
displayed fields depend on your selection. With each subsequent selection the dialog fields will change
depending on you selection in that field.
Figure 4.15 - Example: Set Conditions Self Configuring Based on Protocol Selection
Chapter 4 Capturing and Analyzing Data TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 63