User manual
Note: f you use Copy/Paste to insert the Long Term Key , ComProbe software will auto
correct (remove invalid white spaces) to correctly format the key
2. Enter a PIN or out-of-band (OOB) value for pairing.
This optional information offers alternative pairing methods.
Click here to learn more about these possible pairing values.
๎One of two pieces of data allow alternative pairing:
1. PIN is a six-digit (or less if leading zeros are omitted) decimal number.
2. Out-of-Band (OOB) data is a 16-digit hexadecimal code which the devices exchange via a channel that is
different than the le transmission itself. This channel is called OOB.
For off-the-shelf devices we cannot sniff OOB data, but in the lab you may have access to the data exchanged
through this channel.๎
Click here to see how to capture data after completing the configuration.
Sniffer Diagnostics: Checking this box will record communications traffic between ComProbe software and the
ComProbe BPA low energy hardware. Most often used in conjunction with Frontline Technical Support
instructions should the user have problems with their hardware. Checking this box will not affect capture, analysis,
or display of data.
Filter out ADV packets for Non-Configured devices: Checking this box will filter out advertising packets
from devices not specified in the LE Device field. If "Sync with First Master" has been selected in the LE Device
field checking this box will have not affect. the purpose of this option is to reduce the advertising traffic in
situations where there are many devices; advertising traffic can clutter the captured data with unnecessary
packets.
3.1.3 BPA Low Energy LE Device Database
The LE Device Database contains information about low energy devices that have been discovered or entered
by the user.
Figure 3.3 - BPA Low Energy datasource LE Device Database Tab
The LE Device Database is automatically updated when you perform certain operation such as entering
encryption information from the Devices Under Test dialog.
Chapter 3 Configuration Settings TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 17