User manual

Figure 5.8 - Find Special Events tab
5. Check the event or events you want to look for in the list of special events. Use Check All or Uncheck
All buttons to make your selections more efficient.
6. Click Find Next and Find Previous to move to the next instance of the event.
Not all special events are relevant to all types of data. For example, control signal changes are relevant only to
serial data and not to Ethernet data.
For a list of all special events and their meanings, see List of all Event Symbols on page 153.
5.1.6 Searching by Signal
Searching with Signal allows you to search for changes in control signal states for one or more control signals. You
can also search for a specific state involving one or more control signals, with the option to ignore those control
signals whose states you don’t care about.
The analyzer takes the current selected byte as its initial condition when running searches that rely on finding
events where control signals changed.
To access the search by time function:
1. Open a capture fileto search.
2.
Open the Event Display or Frame Display window.
3.
Click on the Find icon or choose Find from the Edit menu.
4. Click on the Signal tab of the Find dialog.
TELEDYNE LECROY Chapter 5 Navigating and Searching the Data
168 Frontline BPA low energy Hardware & Software User Manual