User manual
3. When you have specified the pattern you want to use, click on the Find Next or Find Previous buttons
to start the search from the current event.
The result of the search is displayed in the in Frame Display and Event Display.
Refer to Searching by Decode on page160 for information on Side Restrictions
5.1.3 Searching by Time
Searching with Time allows you search on timestamps on the data in Frame Display and Event Display
window.
To access the search by time function:
1. Open a capture fileto search.
2.
Open the Event Display or Frame Display window.
3.
Click on the Find icon or choose Find from the Edit menu.
4. Click on the Time tab of the Find dialog.
Note: The tabs displayed on the Find dialog depend on the product you are running and the
content of the capture file you are viewing.
Figure 5.6 - Find by Time tab
The analyzer can search by time in several different ways.
Search for Absolute/Relative timestamp.
TELEDYNE LECROY Chapter 5 Navigating and Searching the Data
164 Frontline BPA low energy Hardware & Software User Manual