User manual

l Included packets are defined separately for each of the radio buttons that appear above the throughput
indicators.
l Duration of the included packets is measured from the beginning of the first included packet to the end of
the last included packet.
The radio buttons above the throughput indicators specify
which packets are included. Radio button descriptions are modified per the following:
l Bluetooth low energy packets from non-configured devices are excluded if the
Configured radio button in the LE Devices group is selected.
l Frame Display filtering has no effect here in that packets that are filtered-out in
Frame Display are still used here as long as they otherwise meet the criteria for
each radio button as described below.
All packets are used for average throughput, and packets
occurring in the last 1 second of the session are used for 1
second throughput, except that Bluetooth low energy
packets from non-configured devices can be excluded as noted above.
Selected packets (the selected packet range is shown in
the timeline header) are used for average throughput,
and packets in the 1 second duration ending at the end of
the last selected packet are used for 1 second, except that Bluetooth low energy packets from non-
configured devices can be excluded as noted above.
Figure 4.47 - Timeline Header Showing Selected Packets
The viewport is the purple rectangle in the Throughput
Graph and indicates a specific starting time, ending time,
and resulting duration. Packets that occur within that
range of time are used for average throughput, and packets in the 1 second duration ending at the end
of the last packet in the viewport time range are used for 1 second throughput, except that Bluetooth
low energy packets from non-configured devices can be excluded as noted above.
Chapter 4 Capturing and Analyzing Data TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 107