User manual

Operator’s Manual
922244-00 Rev A
45
B
Setup Device
Setup Device Overview
Use the Setup Device tabs to quickly access the following ArbStudio
parameters (the Timing tab is shown by default):
 The Timing Tab (below)
 The Channel Out Math Tab (on page 47)
 The Trigger OUT Math Tab (on page 48)
 The Digital I/O Tab (on page 49)
 The Strobe Tab (on page 50)
Timing Tab
The sample rate for the pair of adjacent channels can be set to the
following ranges:
 The 4S/s – 250 MS/s range for Arbitrary channels or Pattern
Generator Pods.
 The 125 MS/s – 250 MS/s for DDS channels.