User manual

Operator’s Manual
922244-00 Rev A
119
B
 Copy Waveform.
Select the entire waveform clicking on the signal/bus name on the
left column or select a portion of it with mouse selection.
Press the Copy Waveform button to copy the waveform.
 Paste Waveform.
Paste the copied waveform into a selected area of the graph (mouse
selection) or from the start of another waveform.
Data Editor
The Data Editor can also be used to edit signal/bus values. Data is visualized
numerically in columns when using the Data Editor. Selections made in the
Data Editor are also shown on the Digital Waveform Editor directly above
it.
The Data Editor contains the following two additional columns:
 Samples - Contains the progressive number of the samples
generated.
 Time - Contains the progressive absolute time of every sample.