User manual

ArbStudio
102
922244-00 Rev A
Pattern Settings - The Trigger Out Tab
The following parameters are available on the tab:
TRIGGER OUT SOURCE
You can select the trigger source that generates a Trigger Out event.
Multiple sources may be selected.
Signals that can be sent to the Trigger OUT output include Start, Stop,
Marker, Pod A Trigger IN, and BNC Trigger IN.
POLARITY
Choose Positive or Negative for the Trigger OUT signal polarity as desired.
DESTINATION
A logic combination of the Trigger Out event of the enabled channels is
always available on the dedicated BNC Connector and on Pod A/B Trigger
Out signals on the instrument front panel. For more information, see The
Trigger OUT Math Tab (on page 48).