User manual

ArbStudio
96
922244-00 Rev A
Clear all trigger settings and resumes the default trigger conditions.
TRIGGER LEVELS
The ArbStudio Digital Pattern Generator allows editing up to 31 trigger
levels, which are represented by the Edge symbol in the tree positioned on
the left side of the tab.
Each trigger level has an A and B trigger condition.
Each condition can be set by clicking its name and by using the Action drop-
down field (on lower-right side of the tab). Action field options include:
None - The occurring condition is ignored (Never Trigger).
Trigger - The occurring condition leads to a Trigger event.
Jump to Level(n) - The occurring condition leads to a jump at the specified
trigger level (n), where n is the number of a present trigger level.
EDGES AND LEVELS
In order to set condition A or B, the state of the Digital Pattern Generator
channels must be set properly. Each channel state can assume one of the
following attributes:
Don't care
The signal is ignored.
High logic level
Low logic level