User Manual

p14 Pronestander User Manual
10.3 ADJUSTING THE
PELVIC PLATE
Theheightofthepelvicplateisset
totheequivalentdistancebetween
thetopoftheuser’spelvisandtheir
feet.Thepelvicplateisadjustedby
looseningthebolt,oneachsideof
theplateandslidingthepadded
plateintotherequiredposition.Once
therequiredpositionisobtained,
thebolts,
shouldbere-tightened
securely.
10.5 ADJUSTING THE
KNEE CUPS
10.4 ADJUSTING
THE KNEE PLATE
Theheightofthekneeplateis
adjustedbylooseningthebolts
on
eachsideofthekneeplate,slidingthe
kneeplateintotherequiredposition
andthenre-tighteningthebolts
securely.
Minoradjustmentstothe
kneeandpelvicplatemay
bemadeduringuse.
Alwaysusecautiontoensure
ngersdonotbecometrapped
whenadjustingthekneeplate.
Thekneecupscanbemovedfromleft
torightandeachkneecupisxedby
asingleboltatthebackoftheknee
plate.Toadjustthekneecuploosen
thebolt,positionthekneecupas