User Manual

Pronestander User Manual p11
ThePronestandertrayisattached
byslidingtheouterpolesalready
attachedtothetrayovertheinner
polesalreadyattachedtotheframe
andthentighteningthebolts
.The
trayisthensecuredwithatraypin
intooneoftheslots
onthesideof
theframe.
9.2 ATTACHING
THE TRAY
9.3 ATTACHING THE
SANDALS
Inserttherequiredattachmentbolt
alongwiththeretentionplate
Placearubberlid on,both,thetop
andbottomofthesandal.Fasten
usingthefourscrews provided.To
removeorreplacetheattachment
bolt,reversethisprocess.