User guide

Using Your Appliance
About the thermostat
• The thermostat is located in the upper rear part of the
appliance.
• To reduce the temperature inside the appliance, turn
the thermostat towards 6 maximum.
• To increase the temperature inside the appliance turn
the thermostat towards 1 minimum.
• Depending on the ambient temperature of the room
the appliance is in, you may need to adjust the
thermostat accordingly.
CONDITION/REASON: SETTING
ADJUSTMENT:
REFRIGERATOR too cold
Not set correctly for your
conditions
Adjust TEMPERATURE
Control one setting
lower
REFRIGERATOR too warm
Door opened often, large amount of
food added or room temperature
very warm
Adjust TEMPERATURE
Control one setting
higher
FREEZER too cold
Not set correctly for your
conditions
Adjust TEMOERATURE
Control one setting
lower
FREEZER too warm/too little ice
Door opened often, or large amount
of food added or very cold room
temperature (can't cycle often
enough) or heavy ice usage
Adjust TEMPERATURE
Control one setting
5
In some cases food inside the refrigerator may become
frozen, common causes of this are:
• Thermostat is set too high - you will need to adjust
the setting to a more suitable temperature.
• The ambient temperature has dropped suddenly (i.e.
during winter) and this makes the refrigerator even
colder.
Making ice cubes
• Fill the ice cube tray 3/4 full with water and place into
the freezer.
• Place the tray onto a level suraface.
• To remove ice cubes, twist the try or place under
running water for a few seconds to loosen.
• Do not use sharp, pointed or metal implements to
remove the ice cube tray if it becomes frozen to the
fridge.