L5017W/S/B
Contents Safety Warnings ............................................................................................................................ 3 Unpacking ..................................................................................................................................... 5 Installation .................................................................................................................................... 6 Location .........................................................
Safety Warnings For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. • Read all instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party, make sure to include this manual.
• Do not store bottles or glass containers in the freezer compartment. bottle and damage your freezer compartment. (If applicable) WARNING • Keep ventilation openings in the unit enclosure or in the built-in structure clear of obstructions. • Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Thank you for purchasing your new LEC Undercounter Fridge. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. Read all the safety instructions carefully before use and keep this instruction manual for future reference. Unpacking Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.
Installation INSTALLATION Location When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated with an average room temperature of between 16°C and 38°C. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
INSTALLATION Reversing the Door Swing Tools required: Phillips style screwdriver / Flat bladed screwdriver / Hexagonal spanner • Ensure the unit is unplugged and empty. • To take the door off it is necessary to tilt the unit backwards. You should rest the unit on something solid, e.g. a chair just below the top panel. • All parts removed must be saved to do the reinstallation of the door. • Do not lay the unit flat as this may damage the coolant system.
INSTALLATION 4. Swap the bottom bushing and bottom bushing cap of the upper door. The bottom bushing key must be in the correct position to allow it to be inserted correctly. 5. Remove the lower screws, hinge bracket and adjustable feet from the unit bottom. unscrew 6. Remove the screw-type adjustable feet from another side of the unit bottom and transfer it to the corresponding position on the opposite side of the unit bottom.
INSTALLATION 7. Reattach the two lower screws, hinge bracket and adjustable feet to the opposite side of the unit bottom. Loosely secure. screw screw 8. Carefully set the upper door back into place. Ensure the fridge door is aligned horizontally and vertically so that the seals are closed on all sides before finally tightening the top hinge. Insert the hinge bracket and screw it to the top of the unit. 9. Use a spanner to tighten it if necessary. 10.
INSTALLATION Cleaning Before Use Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using a ‘wrung-out’ sponge or cloth. Wash the shelves and salad bin in warm soapy water and dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth. If you require more information refer to the Cleaning section. • Before Plugging in YOU MUST Check that you have a socket which is compatible with the plug supplied with the unit.
Product Overview Internal Light and Thermostat Control Dial Adjustable GlassShelves Upper Door Shelf Salad Bin Cover Salad Bin Lower Door Shelf Levelling Feet Egg Tray 11
Operation Switching On Your Unit 1. Before connecting the unit to the mains supply make sure that the thermostat control dial is set at position OFF. This is located on the right side of the cabinet. Connect the mains cable to the mains socket. 2. Adjust the thermostat control dial to the desired position, bear in mind that the higher the number, the lower the temperature. Position 4 is the recommended setting when operating at normal room temperature (between 16°C and 38°C). 3.
Tips for Keeping Food in the Unit • • • • • Cooked meats/fishes should always be stored on a shelf above raw meats/fishes to avoid bacterial transfer. Keep raw meats/fishes in a container which is large enough to collect juices and cover it properly. Place the container on the lowest shelf. Leave space around your food, to allow air to circulate inside the unit. Ensure all parts of the unit are kept cool. To prevent transfer of flavours and drying out, pack or cover the food separately.
Maintenance Changing the Internal Light 1. Before carrying out the bulb replacement always 1 2 adjust the thermostat control dial to Position 0, then disconnect the mains supply. 2. While holding the lamp cover place coin between lamp cover lip and internal wall of the refrigerator and twist the coin. 3. Remove the lamp cover. 4. Remove the old bulb by unscrewing in an anti-clockwise direction. 5. Replace with a new bulb (220~240V, max. 15W). Please make sure that it is secure in the bulb cover. 6.
0344 8153737
