User's Manual

4. Enter Domain name and Host name. For example, if the domain name provided by your service
provider is test.customtest.dyndns.org, enter customtest.dyndns.org as Domain name, and test as
Host name.
5. Enter User name and Password.
6. Click Submit. As shown in Figure 5-56.
Figure 5-56
5.8.5 Diagnosis
If the CPE is not functioning correctly, you can use the diagnosis tools on the Diagnosis page to
preliminarily identify the problem so that actions can be taken to solve it.
Ping
If the CPE fails to access the Internet, run the ping command to preliminarily identify the problem. To
do so:
Choose System>Diagnosis.
In the Method area, select Ping.
Enter the domain name in the Target IP or domain field, for example,
www.google.com.
Set Packet size and Timeout.
Set Count.
Click Ping. As shown in Figure 5-57.