User's Manual

Figure 5-47
5.8 System
5.8.1 Maintenance
Reboot
This function enables you to restart the CPE. Settings take effect only after the CPE restarts. To restart
the CPE, perform the following steps:
1. Choose System>Maintenance.
2. Click Reboot. As shown in Figure 5-48.
The CPE then restarts.
Figure 5-48
Reset
This function enables you to restore the CPE to its default settings.
To restore the CPE, perform the following steps:
1. Choose System>Maintenance.
2. Click Factory Reset. As shown in Figure 5-49.
The CPE is then restored to its default settings.