User's Manual
Figure 5-18
If you choose enable the firewall, you can modify the configuration about firewall, such as Mac filter, IP
filter, URL filter and so on. If you choose disable, you can’t modify any configurations about the
firewall.
MAC Filtering
This page enables you to configure the MAC address filtering rules.
Enabling MAC Filter
To enable MAC address filter, perform the following steps:
1. Choose Firewall>MAC Filtering
2. Set MAC filtering to Enable.
3. Click Submit. As shown in Figure 5-19.
Figure 5-19
Disabling MAC Filter
To disable MAC address filter, perform the following steps:
1. Choose Firewall>MAC Filtering
2. Set MAC filtering to Disable.
3. Click Submit. As shown in Figure 5-20.